Skip to main navigation menu Skip to main content Skip to site footer

Resistive Coupled Microwave Sintering of Nanostructured ZnO for Solar Window Applications

Abstract

ZnO found applications in solar windows and UV shielding windows. In the present work nanostructured ZnO  is synthesized by the single step auto-igniting combustion technique. Various powder characterization techniques revealed that ZnO powders is phase pure and crystallised in face centred cubic lattice with an average crystallite size of 26  nm. A novel sintering strategy called resistive coupled microwave sintering is developed and optimised during the course of work by effectively coupling resistive heating and microwave heating in definite proportions. By this method ZnO is sintered to 98.3% of the theoretical density at  1050oC for a soaking duration of 30 minutes. The pellet sintered using resistive coupled microwave heating shows high load independent hardness of 2.37 GPa .   


References

  1. UmeshR.G, B.Suryanarayana, Vemuri R, K.A.Emmanuel N.Murali, PaulosT, D.Parajuli, K.CB Naidu, Y.Ramakrishna, Optical and luminescence properties of pure, iron-doped, and glucose capped ZnO nanoparticles , Results in Physics, 19 (2020) 10308.
  2. Yewei Z, Shendong Z, Xiaoyong X, Jingguo H, Transparent and UV-shielding ZnO@PMMA nanocomposite films,Opt.Mater 36 [2] (2013) 169-172.
  3. Wilhelm, Albert P, Bo J, Srinivasan A, Lars O, Stefan K, Transparent TiO2 and ZnO thin films on glass for UV protection of PV modules, Frontiers in Materials 6 (2019) 259 1-10.
  4. C T Mathew, Sam Solomon , Jacob Koshy and Jijimon K Thomas, Infrared transmittance of hybrid microwave sintered yttria, Ceram. Int., 41[8] (2015) 10070-10078.
  5. Langford L I, Wilson A J C, Scherrer after Sixty Years: A Survey and Some New Results in the Determination of Crystallite Size, J. Appl. Crystallogr., 11 (1978) 102-113.
  6. H Kalpana,Sanjay B, Amit H, Prakash C, Kakasaheb M, Jalinder A, Nishigandh P, Vasant C, Novel green route of synthesis of ZnO nannoparticles using natural biodegradable polymer and its application as a catalyst for oxidation of aldehydes, Journal of Macromolecular Science, Part Apure and Applied Chemistry, 51[12] (2014) 941-947.
  7. Roy T K, Assessing hardness and fracture toughness in sintered zinc oxide ceramics through indentation technique,Materials Science and Engineering: Part A,volume 640, 2015, ISSN 0921-5093.
  8. E H Smith, Mechanical Engineer’s Reference Book, Butterworth-Heinemann, Wildwood Avenue, Woburn, MA, 2000.
  9. K Durst , Backes B, Franke O and Goken M, Indentation size effect in metallic materials:Modeling strength from pop-in to macroscopic hardness using geometrically necessary dislocations, Acta. Mater., 54 (2006) 2547-2555.
  10. O Sahin, Uzun O, Lizer M S, Gocmez H and Kolemen U, Dynamic hardness and elastic modulus calculation of porous SiAlON ceramics using depth-sensing indentation technique, J. Eur. Ceram. Soc., 28[6] (2008) 1235-1242.
  11. Li and Bradt R C, The microhardness indentation load/size effect in rutile and cassiterite single crystals, J. Mater. Sci., 28 [4] (1993) 917-926.
  12. J Gong and Li Y, An energy-balance analysis for the size effect in low-load hardness testing, J. Mater. Sci., 35 (2000) 209-213.
  13. S Mukerji and Kar T, Vicker’s Microhardness Studies of L-arginine Hydrobromide Monohydrate Crystals (LAHBr), Cryst. Res. Technol., 34[10] (1999) 1323-1328