MECHANICAL SYSTEM EXPERIMENTAL MODAL ANALYSIS

Ajay Kumar; Amar Saraswat; Keshavamurthy T G

MECHANICAL SYSTEM EXPERIMENTAL MODAL ANALYSIS

Authors

Ajay Kumar Sandip University (Sijoul)
Amar Saraswat K.R. Mangalam University, Gurugram, Haryana, INDIA
Keshavamurthy T G Sri Siddhartha Academy of Higher Education

Keywords:

Engineering, Experimental Equipment, Modal Analysis

Abstract

challenges that are of significant importance to modal analysis test engineers are investigated. Automated modal analysis, which is being developed right now in a wide variety of facilities all over the world at the present, is to blame for the problems that have arisen as a result of it. The choice of model structures is the first obstacle, and the real-time modal analysis is the second. Both of these Challenges must be overcome. These two types of difficulties can be categorized separately to make the issues simpler to understand. Each of these groups have ties that bind them to one another in a variety of different ways. Before commencing the experimental modal analysis, it is extremely important to first appropriately handle the initial problem. This must be done before the study can even begin. It is imperative that this step be taken in order to ensure that the outcomes of the analysis are reliable and truthful. The solution to the second problem that had been encountered made it much easier to use modal analysis in the process of determining whether or not mechanical structures are showing signs of degradation. This was made possible as a result of the resolution to the second problem that had been encountered. Discussion will take place throughout the presentations on a variety of issues, including the methodology, the implementation of the program, and the case studies.

References

Zeinkiewicz O.C (1977)., The finite element method, McGraw Hill, New York,

Bathe K.J. (1981), Finite element procedures in engineering analysis, Englewood Cliffs, Printice Hall Inc, New Jersey.

Chandrupatla T.R., Belegundu A. D., Introduction to finite element in engineering, (2007) Printice Hall of India Ltd. New Delhi.

Ewins D. J., Imergun M., (1988), On the reliability of computational dynamic response prediction capabilities (DYNAS), Journal of society of environmental engineers, 27 (1) 3-13

Ewins DJ (2000) Modal testing: theory, practice and application,2nd edn. Research Studies Press Limited, England, UK

Maia NMM, Silva JM (1997) Theoretical and experimental modal analysis. Research Studies Press Limited, England, UK

Baruch M, Bar-Itzhack IY (1978) Optimal weighted orthogonalization of measured modes. AIAA Journal16(4):346–351

Baruch M (1978) Optimization procedure to correct stiffness and flexibility matrices using vibration tests. AIAA Journal 16(11):1208–1210

Berman A (1979) Mass matrix correction using an incomplete set of measured modes. AIAA Journal17:1147–1148

Berman A, Nagy EJ (1983) Improvement of a large analytical model using test data. AIAA Journal 21:1168–1173

Bais RS, Gupta AK, Nakra BC, Kundra TK (2004) Studies in dynamic design of drilling machine using updated finite element models. Mechanical Mach Theory 39:1307–1320

Dhandole SD, Modak SV (2009) Simulated studies in FE model updating with application to vibro-acoustic analysis of the cavities, In: Proceedings of the third international conference on integrity, reliability and failure, Porto/Portugal

Modak SV (2014) Direct matrix updating of vibro-acoustic finite element models using modal test data. AIAA J 52(7):1–7

Caesar B (1986), Update and identification of dynamic mathematical models. Proceedings of the fourth international modal analysis conference. Los Angeles, USA, pp 394–401

Jain, D. (2019), DONT KILL INNOVATION: CONCEPT TOWARDS A NEW ACADEMIC WORLD (2019) IARS International Research Journal, 9(1). doi: 10.51611/iars.irj.v9i1.2019.98.

Jain, D. (2012), Implementation of ISMS and its Practical Shortcomings (2012) IARS International Research Journal, 2(1). doi: 10.51611/iars.irj.v2i1.2012.19.

Jain, D. (2012), Insider Threats: Risk to Organization (2012) IARS International Research Journal, 2(1). doi: 10.51611/iars.irj.v2i1.2012.18.

Jain, D. (2020), Digitized Education: A New Social Divide between Rural and Urban India (2020) IARS International Research Journal, 10(1). doi: 10.51611/iars.irj.v10i1.2020.115.

Jain, D. (2012), An Assessment of ISMS Process Maturity based on Readiness and Awareness of team members of selected IT Organizations (2012) IARS International Research Journal, 2(2). doi: 10.51611/iars.irj.v2i2.2012.22.

Chen JC, Kuo CP, Garba JA (1983) Direct structural parameter identification by modal test results. Proceedings of the 24thstructural dynamics and materials conference. California, USA, pp 44–49

Kaushik P, Yadav R. Deployment of Location Management Protocol and Fault Tolerant Technique for Mobile Agents. Journal of Advances and Scholarly Research in Allied Education [JASRAE]. 2018;15(6):590-595. DOI: 10.29070/JASRAE.

MECHANICAL SYSTEM EXPERIMENTAL MODAL ANALYSIS