EXPERIMENTAL INVESTIGATION OF NATURAL FIBER REINFORCED CONCRETE MECHANICAL PROPERTIES

Amar Saraswat; M D Rahmatullah; Savitha C

EXPERIMENTAL INVESTIGATION OF NATURAL FIBER REINFORCED CONCRETE MECHANICAL PROPERTIES

Authors

Amar Saraswat K.R. Mangalam University, Gurugram, Haryana, INDIA
M D Rahmatullah Sandip University (Sijoul)
Savitha C Sri Siddhartha Academy of Higher Education

Keywords:

Engineering, fiber reinforced, sisal

Abstract

In the last 20 years, interest in ecologically friendly materials has grown, resulting in more researchers studying natural fiber reinforced composites. Natural fiber reinforced composites are becoming more essential for this reason. This is one of the reasons natural fiber reinforced composites are becoming more popular. Natural fibers are a great alternative to expensive, non-renewable synthetic fibers. Natural fibers have replaced synthetic fibers in many applications. Natural fibers have replaced synthetic fibers in many applications due to their better characteristics. Several plant-based products use natural fibers. Natural fiber reinforced composites are lighter, cheaper, renewable, biodegradable, and environmentally friendlier than manufactured fibers like glass and graphite. Natural fiber reinforced composites are eco-friendly. In addition to their environmental benefits, natural fiber reinforced composites provide several advantages. Because natural fibers and their composites can be used in very demanding situations, it is crucial to analyze their potential.

References

da Fonseca, R. P., Rocha, J. C., Cheriaf, M. (2021). Mechanical properties of mortars reinforced with Amazon rainforest natural fibers. Materials, 14(1), 155. DOI 10.3390/ma14010155.

Juarez, C., Duran, A., Valdez, P., Fajardo, G. (2007). Performance of “Agave lecheguilla” natural fiber in portland cement composites exposed to severe environment conditions. Building and Environment, 42(3), 1151–1157. DOI 10.1016/j.buildenv.2005.12.005.

Mahmud, S., Hasan, K. F., Jahid, M. A., Mohiuddin, K., Zhang, R. et al. (2021). Comprehensive review on plant fiber-reinforced polymeric biocomposites. Journal of Materials Science, 2021, 1–34. DOI 10.1007/ s10853-021-05774-9

Memon, M. J., Jhatial, A. A., Murtaza, A., Raza, M. S., Phulpoto, K. B. et al. (2021). Production of eco-friendly concrete incorporating rice husk ash and polypropylene fibres. Environmental Science and Pollution Research, 2021, 1–17. DOI 10.1007/s11356-021-13418-3.

Olivito, R. S., Cevallos, O. A., Carrozzini, A. (2014). Development of durable cementitious composites using sisal and flax fabrics for reinforcement of masonry structures. Materials & Design, 57, 258–268. DOI 10.1016/j. matdes.2013.11.023.

Poorsaheli, H. B., Behravan, A., Aghda, S. T. T. (2021). Durability performance of hybrid reinforced concretes (steel fiber + polyolefin fiber) in a harsh marine tidal zone of Persian Gulf. Construction and Building Materials, 266, 121176. DOI 10.1016/j.conbuildmat.2020.121176.

Qiao, X., Ni, S., Lu, H., Wang, X., Zhou, X. (2021). A novel method to prepare chemical fibers by plasticizing cotton with 1-allyl-3-methylimidazolium chloride. International Journal of Biological Macromolecules, 166, 1508–1512. DOI 10.1016/j.ijbiomac.2020.11.030.

Rostami, R., Zarrebini, M., Mandegari, M., Sanginabadi, K., Mostofinejad, D. et al. (2019). The effect of concrete alkalinity on behavior of reinforcing polyester and polypropylene fibers with similar properties. Cement and Concrete Composites, 97, 118–124. DOI 10.1016/j.cemconcomp.2018.12.012.

Rucka, M., Wojtczak, E., Knak, M., Kurpińska, M. (2021). Characterization of fracture process in polyolefin fibrereinforced concrete using ultrasonic waves and digital image correlation. Construction and Building Materials, 280, 122522. DOI 10.1016/j.conbuildmat.2021.122522.

Suda, V. R., Sutradhar, R. (2021). Strength characteristics of micronized silica concrete with polyester fibres. Materials Today: Proceedings, 38, 3392–3396. DOI 10.1016/j.matpr.2020.10.569.

Shah, I., Jing, L., Fei, Z. M., Yuan, Y. S., Farooq, M. U. et al. (2021). A review on chemical modification by using sodium hydroxide (NaOH) to investigate the mechanical properties of sisal, coir and hemp fiber reinforced concrete composites. Journal of Natural Fibers, 2021, 1–19. DOI 10.1080/15440478.2021.1875359.

Silva, G., Kim, S., Aguilar, R., Nakamatsu, J. (2020). Natural fibers as reinforcement additives for geopolymers–a review of potential eco-friendly applications to the construction industry. Sustainable Materials and Technologies, 23, e00132. DOI 10.1016/j.susmat.2019.e00132.

Pacheco-Torgal, F., Jalali, S. (2012). Earth construction: Lessons from the past for future eco-efficient construction. Construction and Building Materials, 29, 512–519. DOI 10.1016/j.conbuildmat.2011.10.054.

Matheu, P. S., Ellis, K., Varela, B. (2015). Comparing the environmental impacts of alkali activated mortar and traditional portland cement mortar using life cycle assessment. IOP Conference Series: Materials Science and Engineering. Vol. 96, No. 1, 012080. IOP Publishing. DOI 10.1088/1757-899X/96/1/012080.

Asaithambi, B., Ganesan, G., Kumar, S. A. (2014). Bio-composites: Development and mechanical characterization of banana/sisal fibre reinforced poly lactic acid (PLA) hybrid composites. Fibers and Polymers, 15(4), 847–854. DOI 10.1007/s12221-014-0847-y.

Kaushik P, Miglani S, Shandilya I, Singh A, Saini D,Singh A. HR Functions Productivity Boost by using AI.International Journal on Recent and Innovation Trends in Computing and Communication. 2023;11(8s):701-713. DOI: 10.17762/ijritcc.v11i8s.7672.

EXPERIMENTAL INVESTIGATION OF NATURAL FIBER REINFORCED CONCRETE MECHANICAL PROPERTIES